Fujitsu BS2000 User Manual Download Page 230

Page: 230 / 374

Managing units of the SE server

Managing hardware

228

U41855-J-Z125-3-76

Displaying IP interfaces of the HNC

Select

Hardware

→

Units

[

→

<se server>

(SE<model>)

]

→

<unit> (HNC)

→

Information

IP interfaces

tab:

The

IP interfaces

tab provides information about the HNC's LAN interfaces.

The following function is available:

Changing the packet length in the case of LOCLAN and PCI interfaces

In the case of a PCI interface you can only change the packet length in normal operation,
i.e. the

Status

is displayed for the interface.

Click the

Change

icon by the required IP interface, select the required packet length in

the subsequent dialog box, and confirm the action.

Summary of Contents for BS2000























































































































































































































































































































































































Search results

Summary of Contents for BS2000

Reviews:

Related manuals for BS2000

Brands by name

Popular brands

Fujitsu BS2000, User Manual

Search results

Summary of Contents for BS2000

Reviews:

Related manuals for BS2000

Brands by name

Popular brands