Fujitsu BS2000, User Manual

Page: 208 / 374

Managing units of the SE server Managing hardware
206
U41855-J-Z125-3-76
Displaying FC interfaces of the MU
Ê
Select
Hardware
→
Units
[ →
<se server> (SE<model>)
] →
<unit> (MU)
→
Information
,
FC interfaces
tab:
The FC interfaces tab displays three groups with information on the FC interfaces:
●
FC interfaces provides information for each FC interface of the MU on the host controller
used, the plug-in position (slot and port), the Type (firmware and revision status), the
local WWPN ( W orld W ide P ort N umber) of the FC interface, and the connection
channel to the Server Unit /390 ( C hannel P ath ID - CHPID). The hardware status of the
FC interface is also displayed ( UP / DOWN ).
●
FC targets contains the WWPNs of the FC interfaces on the accessible FC controllers
(targets). The WWPN identifies a port unambiguously worldwide.
●
FC paths contains information on the connections between the units and the accessible
FC controllers. Address information on the end points of the various connections is
displayed.