Fujitsu B34-9 UE Page 35 Operating Manual Download

Page: 35 / 51

Operation

Setting colour temperature and colours

MODE

COLOR

D-Mode

sRGB

Low Blue Light

Photo

Video

Custom

5000 K

6500 K

7500 K

9300 K

Native

RGB Adjust

Office

►

Press the

button to open the

MODE

setting window.

►

Press the

button to select

Custom

mode.

►

Press the

button to arrive at the choice of colour temperature.

►

Press the

button to select the desired colour temperature.

►

Press the

button to con

rm the selected colour temperature or

close the window without making any changes.

Function

Description

5000 K

6500 K

7500 K

Native

Select the colour temperature

The "warmth" of the screen colours is set using the colour temperature. The
colour temperature is measured in K (= Kelvin).

In the

Native

and

Custom Color

settings, the full colour space of the LCD

panel can be used.

RGB Adjust

You can change the colour ratios of the primary colours (red, green, blue) as
required using this function.

►

Press the

button to arrive at the selection of colour channels.

►

Press the

button to select the desired colour channel.

►

Press the

button to make the desired setting.

►

Press the

button to save the settings and return to the previous menu.

Fujitsu

Summary of Contents for B34-9 UE




















































Search results

Summary of Contents for B34-9 UE

Reviews:

Related manuals for B34-9 UE

Brands by name

Popular brands

Fujitsu B34-9 UE, Operating Manual

Search results

Summary of Contents for B34-9 UE

Reviews:

Related manuals for B34-9 UE

Brands by name

Popular brands