background image

En-2

OPERATING MANUAL

 

WARNING

• This appliance is not intended for use by persons (including 

children) with reduced physical, sensory or mental 

capabilities, or lack of experience and knowledge, unless 

they have been given supervision or instruction concerning 

use of the appliance by a person responsible for their safety.

• Children should be supervised to ensure that they do not 

play with the appliance.

• Do not use inflammable gases near this product.
• Do not expose yourself directly to the cooling airflow for 

many hours.

• Do not insert your fingers or any other objects into outlet port 

or inlet port.

• Do not operate with wet hands.
• Do not use means to accelerate the defrosting process or to 

clean the appliance, other than those recommended by the 

manufacturer.

• Do not pierce or burn.

• Do not install the unit in area filled with mineral oil such as a 

factory or area containing a large amount of splashed oil or 

steam such as a kitchen.

• Do not start or stop the operation of this product by turning 

on or off the circuit breaker.

 

CAUTION

• Provide occasional ventilation during use.
• Always operate the unit with air filters installed.
• Ensure that any electronic equipment is at least 1 meter 

away from either the indoor unit or outdoor unit.

• Turn off power source when not using this product for 

extended periods.

• After long period of use, check whether the installation stand 

does not deteriorate to prevent the unit from falling down.

• The airflow direction and the room temperature should be 

carefully considered when you use this product in a room 

with infants, children, elderly or sick persons.

• Do not place any other electrical products or household 

belongings under this product.

  Dripping condensation from this product might get them wet, 

and may cause damage or malfunction of your property.

• Do not expose this product directly to water.
• Do not use this product for preservation of food, plants, 

animals, precision equipment, art work, or other objects. This 

may cause quality deterioration of those items.

• Do not expose animals or plants to the direct airflow.
• Do not drink the drainage from the air conditioner.
• Do not pull the power supply cable.
• Do not touch the aluminum fins of heat exchanger built-in this 

product to avoid personal injury when you install or maintain 

the unit.

• Do not direct the airflow at fireplaces or heating apparatus.
• Do not block or cover the intake grille and the outlet port.
• Do not apply any heavy pressure to radiator fins.
• Do not climb on, place objects on, or hang objects from this 

product.

Safety Precautions (continued)

Battery (R03/LR03/AAA × 2) loading and remote controller preparation

4

2

3

1

6

7

8

5

9

5

    Press "CLOCK ADJUST" button to start clock setting.

6

    Set the day of the week by pressing "SELECT" button (Monday 

to Sunday). *By pressing the "TEMP. 

(  /  ) 

" buttons, the time 

indicator can be changed from a 24-hour to a 12-hour clock.

7

    Press "NEXT" button to continue.

8

    Set the time by pressing "SELECT" button. 

Pressing 

 or 

 changes the value by the minute. 

Pressing down on 

 or 

 changes the value by 10 minutes.

9

    To complete, press the "SEND" button close to the indoor unit. 

Settings may not be properly sent if pressed from a distance.

Notes:

•  Use specified type of batteries only.

•  Do not mix different types or new and used batteries together.

• Batteries can be used about 1 year in ordinary use.

•  If the remote control range noticeably shortens, replace the batter-

ies, and press "RESET" button as shown in page 5.

Indoor unit accessories

Remote 

controller

Batteries

Air cleaning filters

Filter holders

Remote controller 

holder

Tapping screws

Remote controller holder installation

3

2

1

Screws

Insert

Slide up

 

WARNING

Take care to prevent infants and young children from acciden-

tally swallowing the batteries.

 

CAUTION

• Do not attempt to recharge dry batteries.
• Do not use dry batteries that has been recharged.

Summary of Contents for ASTG30CMTA













Reviews: