
Before using the terminal
37
◆
Turning power on
・
Before turning on the power, make sure that there is no gap
between the terminal and the slot cap.
1
Press and hold
P
(2 sec. or more) until the
indicator LED lights in green
The terminal vibrates and the lock screen appears
following the startup screen.
・
For the first activation, make initial settings.
2
Unlock the screen lock
・
For unlocking method for screen lock, refer to
"Unlocking screen lock".
◆
Turning power off
1
Press and hold
P
until the phone options menu
appears
・
In the options menu, the following items are displayed.
Power off : Turn the terminal OFF.
Restart : The terminal will restart.
Airplane mode : Turn the Airplane mode ON/OFF.
→
P133
Manner mode/Manner mode (Silent)/Manner mode
(Alarm) : Turn the Manner mode ON/OFF.
Emergency mode : Turn the Emergency mode ON/OFF.
2
[Power off]
→
[OK]
The terminal turns off vibrating.
◆
Using touch panel
Touch the touch panel directly to operate the terminal.
❖
Notes for using the touch panel
The touch panel is designed for being touched lightly with
fingers. Do not push it forcibly with a finger or press it with
sharp objects (nail, ballpoint pen, pin, etc.).
・
Touching the touch panel may not work in the following
cases. Note that it may cause malfunction.
- Operation with tip of fingernail
- Operation with a foreign object on the display
- Operation with protective sheet or seal on the display
- Operation with the touch panel wet
- Operation with finger wet by sweat or water
- Operation under water
Turning power on/off
Basic operation