Before using the terminal
32
A docomo nano UIM card is an IC card that stores user
information, such as the users phone number.
・
You can use the terminal only with a docomo nano UIM
card. If you have a docomo mini UIM card, docomo UIM
card, or FOMA card, bring it to a docomo Shop to replace it
with a docomo nano UIM card.
・
If docomo nano UIM card is not inserted to the terminal,
some functions such as making/receiving calls and sending/
receiving SMS are not available.
・
For details on the docomo nano UIM card, refer to the
instruction manual for docomo nano UIM card or NTT
DOCOMO website.
◆
Installing/Removing a docomo nano
UIM card
・
Install/remove after turning OFF the power.
・
Be sure to use the tray when inserting a docomo nano UIM
card. Failure to do so may cause a malfunction.
■
Installing
a
Face up the display side of the terminal and open the slot
cap hooking the groove with your fingertip (
a
)
b
Put your fingertip on the groove of the tray and pull it
straight out (
b
)
・
The tray is designed to be removed from the docomo
nano UIM card slot.
c
With the IC side facing up, place the docomo nano UIM
card on the tray (
c
)
・
Check the orientation of card's corner.
d
Make sure that the display side of the terminal is facing
down, then insert the tray straight into the docomo nano
UIM card slot (
d
)
e
Press firmly the slot cap of the terminal to close
docomo nano UIM card
a
c
d
b
Corner cut
IC
Slot cap
Tray
Groove