Fujitsu Arrows NX F-01J, Instruction Manual

Page: 153 / 218

Settings
151
◆
User
By adding users, the terminal can be shared with multiple
users (a function available by users and guests).
1
From the Home screen, → [Settings] →
[Device management]
→
[User]
2
Set required items
You (XXX) : The current user. Tap to edit the user names
and icons.
(User name) : Registered user names are displayed. Tap to
switch users.
･
Set whether to permit a user to use the phone/SMS
function and delete a user by tapping
of the user
while the owner is using.
Guest : Tap when the terminal is used by persons other
than registered users.
･
Set whether to permit a guest to use the phone function
by tapping
of the guest while the owner is using.
Add user : Add a user to register.
･
The initial settings are required every time a user is
added. Set according to the instruction on the screen.
✔
INFORMATION
･
Up to 5 users for the owner and guests in total can be
registered.
･
On the owner's terminal, "Owner" is displayed below the user
name.
･
The display of user names varies depending on the names
registered at the initial settings of the terminal.
- When both the first and last names are registered or when
only the first names are registered: the first names are
displayed
- When only the last names are registered: the last names are
displayed
- When the first and last names are not registered at the
initial settings: If My Profile ( → P76) is registered, the
registered contents are displayed.
･
To change a user name, tap the user name while using it →
Enter a user name
→
Tap [OK].
･
To delete a user while using it, tap [MENU] → [Delete (user
name) from this device].
･
To delete a guest while using it, tap [Remove guest] or
[MENU]
→ [Delete Guest from this device].
･
When a security unlock preference which requires
authentication is selected, open the notification panel (
→ P50)
and tap , you cannot add a new user or guest.
To permit to add users, tap [MENU] → Place a check mark in
[Add users when device is locked] while the owner is using.
･
While a user or a guest is using, the displayed functions are
different or the use of the applications or functions are
limited.
Device management