Fujitsu Arrows NX F-01J, Instruction Manual

Page: 137 / 218

Settings
135
Set up about lock.
1
From the Home screen, → [Settings] → [Lock
& Security]
2
Set required items
Security unlock preference : Setting steps
→
P138
Change unlock pattern
*1
: Change unlock pattern.
Change Security code
*1
: Change Security code.
Change password
*1
: Change password.
Register iris
*1
: Setting steps
→
P139
Iris settings
*1
: Setting steps → P141
Make pattern visible
*1
: Set whether to make pattern
visible when entering pattern for unlocking the screen
lock.
Automatically lock
*1
: Lock the screen when the set time
elapses after the terminal goes into the sleep mode if a
security unlock preference which requires authentication
on the lock screen is selected.
Power button instantly locks
*1
: Set whether to lock the
screen immediately after
P
is pressed. To cancel the
screen lock, authentication is needed.
Slide to activate camera
*2
: Set whether to activate
camera by flicking the lock screen from the right edge to
the left.
Lock screen message
*1
: Enter a message displayed on
the lock screen.
Display method for notification : Set whether to display all
notifications on the lock screen.
Smart Lock
*1
: Setting steps → P141
Personal note : Setting steps
→
P141
Make passwords visible : Set whether to display
passwords when entering security code/passwords.
Security : Set followings.
Storage type : Setting steps
→
P142
Trusted credentials : Setting steps → P142
Install certificates : Setting steps → P142
Clear credentials : Setting steps → P142
Hide recently used app : Setting steps
→
P142
Device administrators : Set whether to enable the device
administration function.
Unknown sources : Setting steps
→ P143
Set up SIM card lock
*3
: Setting steps
→
P143
Trust agents : Manage trust agents such as Smart Lock.
Application pinning : Setting steps
→ P144
Apps with usage access : Manage the application that can
access to the application usage history on the terminal.
Encrypt phone : You can check that the system data saved
in the internal storage is encrypted.
･
You cannot change the setting of [Encrypt phone] on
the terminal.
*1 Displayed items vary depending on the security
unlock preference.
*2 This may not appear depending on the settings of
the Home application or security unlock preference.
*3 Not displayed if a docomo nano UIM card is not
inserted.
Lock & Security