Fujitsu Arrows NX F-01J, Instruction Manual

Page: 133 / 218

Settings
131
◆ Stopping packet connection
Some applications automatically perform packet
communications. Packet communication is kept active unless
you cut off the connection or the time-out occurs. Activate or
deactivate packet communication as required.
1
From the Home screen, → [Settings] → [Data
communication/Airplane mode]
→
[Cellular
networks]
2
Turn OFF [Data enabled]
3
Check the content and [OK]
◆
Setting access point (APN)
Access point for connecting to the Internet (sp-mode) is
already registered. You can add and change access points if
necessary.
For details on sp-mode, refer to NTT DOCOMO website.
https://www.nttdocomo.co.jp/service/spmode/
For using mopera U, Business mopera Internet, add the access
point manually.
For details on mopera U, refer to mopera U website.
https://www.mopera.net/
･
When Tethering is set to on, access point setting is
unavailable.
→ P133
❖
Checking the access point in use
1
From the Home screen,
→
[Settings]
→
[Data
communication/Airplane mode] → [Cellular
networks] → [Access Point Names]
❖
Adding an access point
･
Do not change the MCC/MNC to other than 440/10. The
setting disappears from the screen.
1
From the Home screen,
→
[Settings]
→
[Data
communication/Airplane mode] → [Cellular
networks] → [Access Point Names]
2
[ ＋ ]
3
[Name] → Enter a network profile → [OK]
4
[APN] → Enter the access point name → [OK]
5
Enter other items required by network
operator
→ [MENU] → [Save]
✔
INFORMATION
･
When MCC and MNC settings are not displayed on the screen
after being changed, reset it to the default settings or set the
access point manually.
❖
Initializing an access point
By initializing an access point, the default state is restored.
1
From the Home screen, → [Settings] → [Data
communication/Airplane mode] → [Cellular
networks]
→
[Access Point Names]
2
[MENU] → [Reset to default]