Connecting external devices
HDMI port (device-dependent)
HDMIport
The HDMI port of your notebook can be used to connect an external ampli
fi
er,
LCD TV or a plasma TV with an HDMI connection.
►
Connect the data cable to the
external device.
►
Connect the data cable to the HDMI
port of the notebook.
Some LCD televisions have only two loudspeaker connections and therefore
cannot reproduce Dolby digital or DTS. In order to reproduce the sound, you
must go into
Windows Vista
and adjust the sound settings.
Proceed as follows:
►
Select
Startsymbol – (Settings) – Control Panel – Hardware and Sound – Sound
.
►
Mark
Realtek Digital Output
.
►
Select
Properties – Supported formats
.
►
Deactivate the settings
DTS audio
and
Dolby digital
.
►
Con
fi
rm the settings with
OK
.
Setting the refresh rate for your external monitor
Monitor
If the refresh rate set is too high, the monitor may be damaged. Please see the
documentation included with your monitor for the maximum possible refresh rate.
By setting the optimum refresh rate you will avoid screen
fl
icker.
►
Set the appropriate refresh rate for the type of monitor connected.
►
Select
Startsymbol – (Settings) – Control Panel – Appearance and Personalization
– Personalization: Adjust screen resolution
.
or
►
Right-click on the desktop. Under
Personalization – Display Settings
, choose screen type 1 or 2.
►
Select
Advanced Settings – Monitor
.
►
Select
Screen Refresh Rate
to choose the optimum refresh rate for the connected monitor type.
►
Click
Apply
and
OK
.
A26391-K90-Z200-1-7619, edition 1
57
Summary of Contents for AMILO M Series
Page 1: ...Operating Manual English AMILO Notebook ...
Page 3: ......
