Fujitsu AIRSTAGE UTY-ASGXZ1 Operating Manual Download Page 54

Page: 54 / 141

Data acquisition application right click menu

Change User ID

4-6-3

The User ID of a registered user can be changed.

User ID selection field

Select the user to be changed.

The currently registered users can be displayed and selected with [▼].

New User ID input field

Input the new user ID to be newly registered. (Up to 20 alphanumeric characters) (*1)

Password input field

Input the password of the user to be changed. (Up to 20 alphanumeric characters) (*1)

Update button

Registers the inputted contents. (*2)

Close button

Closes this screen.

When the new user ID and password input fields are not inputted, an error

message is displayed.
When the password of the selected user ID is incorrect, an error message is

displayed.

Note

Summary of Contents for AIRSTAGE UTY-ASGXZ1














































































































































Search results

Summary of Contents for AIRSTAGE UTY-ASGXZ1

Reviews:

Related manuals for AIRSTAGE UTY-ASGXZ1

Brands by name

Popular brands

Fujitsu AIRSTAGE UTY-ASGXZ1, Operating Manual

Search results

Summary of Contents for AIRSTAGE UTY-ASGXZ1

Reviews:

Related manuals for AIRSTAGE UTY-ASGXZ1

Brands by name

Popular brands