En-15
CLEANING AND CARE
Cleaning the Air Filter
1. Push the intake grille’s hooks inward to-
wards the center of the unit to open the
intake grille.
2. Pull out the
fi
lter from the intake grille.
●
Before cleaning the unit, be sure to stop the unit and disconnect the power supply.
●
Turn off the electrical breaker.
●
A fan operates at high speed inside the unit, and personal injury could result.
●
Be careful not to drop the intake grille.
●
As the
fi
lter cleaning involves high-altitude operation, please consult the professional technical service
personnel.
●
When used for extended periods, the unit may accumulate dirt inside, reducing its performance. We recommend that the unit be
inspected regularly, in addition to your own cleaning and care. For more information, consult authorized service personnel.
●
When cleaning the unit’s body, do not use water hotter than 40 °C, harsh abrasive cleansers, or volatile agents like benzene or
thinner.
●
Do not expose the unit body to liquid insecticides or hairsprays.
●
If the unit will not be operated for a period of one month or more, be sure to allow the inner parts of the unit to dry thoroughly, in
advance, by operating the unit in fan mode for half a day.
3. Clean the air
fi
lter.
Remove the dust from the air
fi
lters by vacuuming or washing
them. After washing, allow the air
fi
lters to dry thoroughly in
an area protected from sunlight.
4. Re-attach the air
fi
lters to the intake grille.
1
Replace the air
fi
lter into its holder.
2
Make sure that the air
fi
lter makes contact with the
fi
lter
stopper when it is replaced into its holder.
5. Close the intake grille and push the intake
grille’s hooks outward.
●
Dust can be cleaned from the air
fi
lter either with a vacuum
cleaner, or by washing the
fi
lter in a solution of mild deter-
gent and warm water. If you wash the
fi
lter, be sure to allow
it to dry thoroughly in a shady place before reinstalling.
●
If dirt is allowed to accumulate on the air
fi
lter, air
fl
ow will
be reduced, lowering operating ef
fi
ciency and increasing
noise.
CAUTION
●
Can be used if set correctly during installation. Please consult authorized service personnel when using this function.
• It lights on when it is time to clean the air
fi
lters.
After turning the power on.
Press the MAINTENANCE button for 2 seconds or
more on the remote control.
The
fi
lter indicator will disappear.
Filter indicator Reset (A special setting)
9378589100_OM.indb 15
9378589100_OM.indb 15
2013-6-18 16:03:41
2013-6-18 16:03:41
