En-14
SWING OPERATION
Begin air conditioner operation before performing this procedure.
Press the vertical air
fl
ow direction and swing button for more than 2 seconds.
(Stop the setting by pressing for more than 2 seconds again.)
●
The swing operation may stop temporarily when the air con-
ditioner’s fan is not operating, or when operating at very low
speeds.
About Swing Operation
The type of operation
Cooling/Heating/Dry/Fan
Range of swing
1
to
4
To select/stop swing operation
ECONOMY OPERATION
Begin air conditioner operation before performing this procedure.
To Use the ECONOMY Operation
Press the ECONOMY button.
The ECONOMY indicator will light.
ECONOMY operation begins.
To Stop the ECONOMY Operation
Press the ECONOMY button again.
The ECONOMY indicator will go out.
Normal operation begins.
About ECONOMY Operation
At the maximum output, ECONOMY operation is approximately 70% of normal air conditioner operation for cooling and heating.
●
If the room is not cooled (or heated) well during ECONOMY operation, select normal operation.
●
During the monitor period in the AUTO mode, the air conditioner operation will not change to ECONOMY operation even if
ECONOMY operation is selected by pressing the ECONOMY operation button.
●
When ECONOMY operation mode is operated, the room temperature will be little higher than the set-temp under cooling mode
and lower than set-temp under heating mode. Therefore, the ECONOMY mode is able to save more energy than other normal
mode.
●
In case of multi-type air conditioner, the ECONOMY operation mode is only available for the set indoor unit.
9378589100_OM.indb 14
9378589100_OM.indb 14
2013-6-18 16:03:40
2013-6-18 16:03:40
