manualshive.com logo in svg

Fujitsu 6240 - fi - Document Scanner, Operator'S Manual

Share
Download
Fujitsu 6240 - fi - Document Scanner Operator'S Manual Download Page 176

6.3 Remedying Typical Troubles

fi-6140 / fi-6240 Image Scanner Operator's Guide

 

 

TROUBLESHOOTING

 

CONTENTS MAP 

 

TOP

  

 

 6.3 Remedying Typical Troubles

 

 

 

Symptom: Vertical lines appear in the scanned image.

 

Back

Did you scan the document with the Flatbed? 

(fi-6240 only) 

 

YES

Clean the document bed of the Flatbed. 

(For details on how to clean the document bed 

of the Flatbed, see Section "

4.2 Cleaning the 

Flatbed [fi-6240].

")

NO

Are the upper/lower glasses and rollers of the 

ADF dirty?

 

YES

Clean the upper/lower glasses and rollers 

inside the ADF.

(For details on how to clean the glasses and 

rollers, see Section "

4.3 Cleaning the ADF.

")

NO

Is there any debris (paper powder or dust) on 

the document?

 

YES

Remove the debris from the document.  

Such debris on the document may be 

transferred onto the upper/lower glasses and 

rollers inside the ADF or the document holding 

pad of the Flatbed (fi-6240 only), producing 

vertical lines in the scanned image. 

NO

Do the lines disappear on images with low 

resolution settings?

 

YES

After this, scan the documents with low 

resolution settings.

NO

If you cannot solve the problem after taking 

measures, check the items in Section "

6.4 

Items to Check Before Contacting the Dealer 
Where You Bought the Scanner" and contact 
the dealer or an authorized FUJITSU scanner 
service provider.

 

file:///D|/Documents%20and%20Settings/scanner/Desktop/Lynx3/06/contents/EN/06/c06_03/07.htm (1 of 2)9/28/2007 2:37:48 PM

Summary of Contents for 6240 - fi - Document Scanner


















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands