Fujitsu 6240 - fi - Document Scanner Operator'S Manual Download

Page: 146 / 241

Chapter 5 REPLACING CONSUMABLES

fi-6140 / fi-6240 Image Scanner Operator's Guide

TROUBLESHOOTING

CONTENTS MAP

TOP

Chapter 5 REPLACING CONSUMABLES

This chapter describes how to replace scanner consumables.

In this chapter Windows XP screenshots are illustrated.

The screens and operations may differ slightly if the OS that you are using is other than Windows XP.

Also, when the FUJITSU TWAIN32 or FUJITSU ISIS scanner driver is updated the screens and operations noted in this chapter will

differ slightly.

Refer to the manuals provided with the update.

WARNING

When operating the scanner, the ADF's inside glass becomes very hot.

Before you replace the consumables, turn off its power and unplug the AC adapter from the

outlet. Wait for at least 15 minutes.

file:///D|/Documents%20and%20Settings/scanner/Desktop/Lynx3/06/contents/EN/05/c05.htm9/28/2007 2:39:23 PM

Summary of Contents for 6240 - fi - Document Scanner


















































































































































































































































Search results

Summary of Contents for 6240 - fi - Document Scanner

Reviews:

Related manuals for 6240 - fi - Document Scanner

Brands by name

Popular brands

Fujitsu 6240 - fi - Document Scanner, Operator'S Manual

Search results

Summary of Contents for 6240 - fi - Document Scanner

Reviews:

Related manuals for 6240 - fi - Document Scanner

Brands by name

Popular brands