Fujitsu 6010N - fi - Document Scanner, Operator'S Manual

Page: 297 / 663

5.7 Setting Scanner Configuration
fi-6010N Network Scanner Operator's Guide 259
5
■
[New] button
The button displays the "Edit Scanner Details" window to add scanner configuration information.
z Scanner Name (Required)
Enter the scanner name.
This may be up to 15 characters long. Alphanumerical characters and hyphens may be used.
Scanner names cannot consist of numerical characters only.
A hyphen cannot be used as the first character of a scanner name.
z IP Address
Enter the numeric IP address.
This may be up to 15 characters long. Numbers and periods (.) may be used.
z MAC Address
Enter the MAC address of the scanner.
This may be up to 17 characters long. Alphanumeric characters and colons (:) may be used.
z Settings Group
Enter the settings group of the scanner. Press the list button to select a settings group name
from the currently used settings groups.
This group name is used to identify the settings contents of a group.
The settings group name entered here is displayed on the "Scanner Settings" window, Set-
tings Groups.
This may be up to 32 characters long.
The following character strings cannot be used:
(Default) (All) __default__ __all__
"__" is two underbars entered one after another.
z Add-in Group
Enter the Add-in group of the scanner. Press the list button to select an Add-in group name
from the currently used Add-in groups.
This group name is used to identify an Add-in module.
The Add-in name entered here is displayed on the "Add-in Installs" window, Add-in
Groups.
This may be up to 32 characters long.
The following character strings cannot be used:
(Default) (All) __default__ __all__
"__" is two underbars entered one after another.
z System Updates
Select the checkbox to not update the system.