Fujitsu 5015C - fi - Sheetfed Scanner Operator'S Manual Download Page 50

Page: 50 / 88

3.1

How to clear the paper jam

When a paper jam occurs while using ADF, follow the procedure below to remove jammed paper.

1) Remove the documents from the ADF paper chute.
2) Open the ADF.

3) Remove the jammed paper.

4) Close the ADF completely until it clicks.

CAUTION

Be careful not to get injured when removing jammed
documents.

CAUTION

Be careful, the ADF may close and pinch your fingers.

ATTENTION

Staples, paper clips, etc. cause document jams. Be sure to fully check the
document and feed path, and remove any small metal objects such as
these.
Also, before you start scanning, be sure to remove any staples, clips, etc.
from the document.

Summary of Contents for 5015C - fi - Sheetfed Scanner

























































































Search results

Summary of Contents for 5015C - fi - Sheetfed Scanner

Reviews:

Related manuals for 5015C - fi - Sheetfed Scanner

Brands by name

Popular brands

Fujitsu 5015C - fi - Sheetfed Scanner, Operator'S Manual

Search results

Summary of Contents for 5015C - fi - Sheetfed Scanner

Reviews:

Related manuals for 5015C - fi - Sheetfed Scanner

Brands by name

Popular brands