Fujitsu 4340C - fi - Document Scanner, Operator'S Manual

Page: 75 / 114

●
7-11
5. At Screen 17,Screen 18 or Screen 19, press to increase the offset or press to decrease the
offset. Then press to activate the setting. The scanner displays the next item of the setup
mode.
10 IPC Status Display
This function allows you to check whether or not the IPC-4D(IMAGE PROCESSING CIRCUIT BOARD) is
installed, and whether or not fi-CMP3(JPEG COMPRESSION BOARD) is installed, and whether or not
fi-434PR(IMPRINTER) is installed.
Check whether or not the respectively option is installed as follows.
1. Press “Next” or “Previous” .
if an IPC4D(IMAGE PROCESSING CIRCUIT BOARD) is installed, Screen 20 will appear.
Screen 20
if an IPC4D(IMAGE PROCESSING CIRCUIT BOARD) is not installed,Screen 21 will appear.
Screen 21
if a fi-434PR(IMPRINTER) only is installed, Screen 22 will appear.
Screen 22
if fi-434PR(IMPRINTER) and IPC4D(IMAGE PROCESSING CIRCUIT BOARD) are installed,
Screen 23 will appear.
Screen 23
if a fi-CMP3(JPEG COMPRESSION BOARD) only is installed, Screen 24 will appear.
Screen 24
if IPC4D(IMAGE PROCESSING CIRCUIT BOARD) and fi-CMP3(JPEG COMPRESSION BOARD)
are installed,Screen 25 will appear.
Screen 25
I P C - 4 D
! 1 0 I P C
N O
! 1 0 I P C
N O O K
! 1 0 I P C P R T
I P C - 4 D O K
! 1 0 I P C P R T
N O O K
! 1 0 I P C J P E G
I P C - 4 D O K
! 1 0 I P C J P E G