U41270-J-Z916-2-76
29
PRIMESTATION as LAN Console
RCA
5.2.1.2
Serial port for connecting the console
The serial ports of the RCA4 have 8-pin RJ 45 connectors.
Transmission rate: 50 Baud to 115.2 Kbit/s
Once you have positioned the RCA in a suitable location or installed it in the
rack,
Ê
connect the RCA to the LAN
Ê
connect the ports to the server system using the appropriate cable, as
shown in the next diagrams.
V
Cables must not prevent the rear door from closing
Always make sure when connecting cables that the rear door of the
system cabinet can be closed again effortlessly.
Ê
Secure the connector by tightening its screws.
Connecting to the RM server
Figure 14: Connecting the RCA to the backplane of the device (in this case an RM 600 E45
model)
Ê
Connect the cable to the pins which are at the top of the HIOS or EHIOS
basic controller (9-pin).
Ê
Insert the connector into the port as shown.