219
PRIMERGY RX100 S4 User’s Guide
8
Co
nf
igurin
g Hardwa
re and Utili
tie
s
8.2.10 IPMI Submenu
This submenu appears when selecting "IPMI" in the [Advanced] menu.
Use this submenu to configure server management settings.
Power Off Source
Software
Enabled (Unchangeable)
Sets to enable the power to be turned off using a
program or the operating system.
Power Button
Enabled (Unchangeable)
Sets to allow the use of the power switch for
turning the power off, when the ACPI function is
disabled.
Power Failure Recovery
• Always On
• Always Off
• Previous State
(At the time of
purchase)
Sets to turn the power on or off after a temporary
main power outage due to power interruption, etc.
Note:
For UPS scheduled operation, set to
[Always On]. Otherwise, the power may
not be turned on at the specified time.
table: Items on the IPMI Submenu
Item
Setting
Description
SEL Load
Displays the usage of event log space as a percentage.
Clear System Event Log
Disabled (Unchangeable)
Sets to clear the event log or not.
Event Log Full Mode
Overwrite
(Unchangeable)
Sets to overwrite the event log when space available
for it becomes full.
Note:
Changing this setting deletes the existing
event log. Before making changes, refer to
"9.3.1 How to Use Server Management Tools"
pg.245) for saving the event log.
table: Items on the Power On/Off Submenu
Item
Setting
Description
Item Specific Help
Change Values
Enter
F9
Select Item
Select Menu
Select Sub-Menu
-/+
F1
Esc
Help
Exit
F10
Setup Defaults
Save and Exit
Advanced
Security
Server
Exit
Main
IPMI
xx%
[Disabled]
[Overwrite]
[Enabled]
SEL Load
Clear System Event Log
Event Log Full Mode
iRMC Time Sync
System Event Log
SDRR Browser
LAN Settings
