Fujitsu Siemens Computers PRIMERGY RX100 S4 User Manual Download Page 194

Page: 194 / 285

194

Chapter 7 Installing Internal Options

7.5.2 How to Install the Internal CD-ROM Drive Unit

The DVD-RAM drive unit package includes parts which are not used for drive installation.

Turn off the server and remove the top cover.

"7.2 Removing and Attaching the Top Cover" (pg.178)

Touch a metal part of the server to discharge static electricity.

Loosen the screws of the dummy unit, and remove the dummy unit.

Slide the dummy unit backward and lift it up.

Make sure to keep the removed dummy units for later use.

Install the CD-ROM drive unit.

Insert the stopper latches of the CD-ROM drive unit into slots of the server.

Screw

Dummy unit

CD-ROM drive unit

Insert latches

Summary of Contents for PRIMERGY RX100 S4






























































































































































































































































































Search results

Summary of Contents for PRIMERGY RX100 S4

Reviews:

Brands by name

Popular brands

Fujitsu Siemens Computers PRIMERGY RX100 S4, User Manual

Search results

Summary of Contents for PRIMERGY RX100 S4

Reviews:

Brands by name

Popular brands