172
Chapter 6 High Reliability Tools
●
Temperature Monitoring
ServerView monitors the temperature. In an environment where ServerView is not applied, the increased
temperature inside the server, due to the fan problem described above, cannot be detected and the system
stop cannot be prevented. In order to detect the problem, the server must reboot to run the BIOS Setup
Utility or the Server Management Tools.
●
Voltage Monitoring
ServerView monitors the voltage. In an environment where ServerView is not applied, voltage
irregularities cannot be detected during operation. In order to detect the problem, the server must reboot
to run the BIOS Setup Utility or the Server Management Tools.That could result in server malfunction or
data loss.
●
Power Supply Monitoring
ServerView monitors the power supply. In an environment where ServerView is not applied, power
supply irregularities cannot be detected during operation. In order to detect the problem, the server must
reboot to run the BIOS Setup Utility or the Server Management Tools. System stops due to power supply
failures cannot be prevented.
6.2.1 Installing ServerView
●
When Installed Using ServerStart
If the OS is installed using ServerStart, ServerView will be installed at once with the OS and other high
reliability tools.
●
Manual Install (Linux)
ServerView cannot be installed using ServerStart. To install ServerView into Windows Server 2003 x64
or a Linux system, refer to "Installing" in "ServerView User’s Guide".
Make sure to install SNMP service before installing ServerView.
■
When an error screen appears after ServerView installation
(Windows Server 2003 only)
If Windows Server 2003 Service Pack 1 is applied, the following message may appear on restarting after
installing/uninstalling ServerView.
There is no problem with operations. Click [Close Message] to close the message.
In order to protect the computer, this program is terminated by
Windows.
Name: SNMP Service
