manualshive.com logo in svg

Fujitsu Siemens Computers Fujitsu-Siemens PC, User Manual, Page: 19 / 96

Share
Download
Fujitsu Siemens Computers Fujitsu-Siemens PC User Manual Download Page 19

Startup 

10 

2.2 Connection 

Before

 you switch on the computer, please connect  

1. the 

monitor, keyboard, mouse

, printer (if applicable), modem 

and any other peripheral units to the PC. Please refer to the 
information in the chapter "Computer Connections", as well as 
the information in the "Quick Guide". 

2. First 

connect 

the 

power cable

 supplied to the power socket on 

the PC and then plug it into a 230 V or 115 V power socket 
(plug strip). You may only operate the unit if its rated voltage 
matches the local mains voltage. If your computer has a 
double-voltage toggle switch, please ensure that it has been 
set to the correct mains voltage for your country. The 
manufacturer’s default setting is 230 V. 

 
After cabling 
3.  Turn on your monitor. 
4.  Then, if applicable, switch on the on/off switch on the back of 

the computer. To start the computer, press the standby button 
located on the front of the computer. 

 
The computer is ready for operation when the green lamp / blue 
ring is illuminated. 

 

2.3 Initial startup of preinstalled software 

Your computer has 

Microsoft®Windows XP Home Edition

 pre-

installed as standard. After turning on the computer, it is ready to 
use. You can use the Windows operating system immediately. You 
may have to make some adjustments. Follow the on-screen 
instructions.  

 

You can find the pre-installed software under: "

Start / All 

Programs

". 

 

Summary of Contents for Fujitsu-Siemens PC

































































































Reviews:

No comments