12
Installation
12
Attaching oil tray
Hold the tab and set the oil tray on the guide rail of
the cooker hood, then push it completely to the end.
Oil tray
Mounting guide hole
Catch
Rectifier panel
11
Attaching rectifier panel
Holding the rectifier panel with both hands, place
the rear of the panel in front of the catches and in
line with the mounting guide holes. Then slide the
panel back to engage the mounting guides and
attach the catches.
Tighten the mounting screw to attach the panel
firmly.
Note
Make sure that the rectifier panel is fixed securely.
It may be a cause of dropping if not fixed firmly.
9
Attaching oil panel
Hook the rear of the oil panel on the catches, then
raise its front. With holding the oil panel, fix it using 3
screws and 1 washer.
Oil panel
Washer
Note
Make sure that a washer is used at the middle hole.
Catch
Filter
Hook
10
Attaching filter
Place the rear of the filter in the catch, push it
back and upward and then slide forward until the
filter is firmly hold by the hook and set in place.
