background image

1U030981

READ AND SAVE THESE INSTRUCTIONS.

Keep this manual in a convenient place for future reference.

FUJI INDUSTRIAL CO., LTD.

TABLE OF CONTENTS

Safety Instructions .................................................................................................. 2
Name of Parts ......................................................................................................... 4
Size & Dimensions .................................................................................................. 4
Range Hood Location ............................................................................................. 5
Installation ............................................................................................................... 6

1. Preparation ..................................................................................................... 6
2. Range Hood Mounting .................................................................................... 9
3. Connecting Power Supply Wires ................................................................... 11
4. Final Assembly and Check ............................................................................ 13
5. Explanation to the End User ......................................................................... 14

Circuit Diagram ..................................................................................................... 14

Installation Manual
RANGE HOOD

MODEL: BUF-03R

Summary of Contents for BUF-03R
















Reviews: