41S_Rev00
14
Description of Products
Operation of Sheet Key
The outline view of a sheet key
Key
Symbol
Key Indicates
Key Name
Key Function
ON/OFF
Power key
To turn ON/OFF the power.
Up/Down
Arrow Keys
These arrows are used to move the cursor for selecting the
items at the menu state, or to change the value or letter of
the discharge conditions and comments. During manual
motor control, these arrows serve as the "Backward" and
"Forward" keys to operate the motors.
HEAT
Heat Key
To start the heating process by the tube heater.
If the HEAT key is pressed once during heating, LED will
blink. Heating operation will be stopped if the HEAT key is
pressed once again during blink.
RESET
Reset Key
This key plays 2 roles, “RESET” or “EXIT”, in accordance
with the status.
[RESET] To quit from any state except the heating process
by tube heater. After pressing this key, the splicer will
return to the ready state with a beep sound.
[EXIT] To turn back before function.
SET
Set Key
To start the splicing operation, or to go through to the
PAUSE state.
To move the cursor direction of arrow at menu state
Power LED
It lights up at green color during operation.
It blinks at orange color during charging the battery pack.
Heat LED
Normally, it darks.
It lights up at the orange during the tube heater operating.
When the heating trouble is happened, it blinks at the
orange with beep.
Illuminometer
To check the illumination around the splicer and then adjust
the monito brightness. Do not cover this hole.
ON/OFF key
HEAT key
Heat LED
RESET key
SET key
Illuminometer
Power LED
UP/DOWN key
