FujiFilm ZPA, Service Manual

Page: 28 / 45

20
TN5A1191-E
3.1 How to go to factory mode
Point the cursor to “6. To Factory Mode” by using the or
key on the Maintenance Mode screen and press the
ENT
key. Then, the password input screen appears.
Maintenance
Mode Select operating item
1. Sensor Input Value
2. Error Log
3. Cal. Log
4. Output Adj.
5. Other Parameter
6. To Factory Mode
ENT
By using or key for numerical value editing and the
key for digit selection, enter the password “4043”, and
press the
ENT
key. The Factory Mode initial screen appears.
The items you can edit are:
4. Option
5. Pressure
12. Others
14. Coefficient
16. Sample Switch
All the other items can only be viewed.
ENT
(CEVQT[/QFG 5GNGEVQRGTCVKPIKVGO
2+.%%QFG
%J0Q
%J&CVC
1RVKQP
2TGUUWTG
.KPGCTK\CVKQP /GOQT[#EEGUU
#&&CVC
1VJGTU
+PVGTHGTGPEG
%QGHHKEKGPV
%CNEWNCVKQP
5CORNG5YKVEJ
6GORGTCVWTG
1WVRWV59
&+159
Point the cursor to the item you want to edit or view, and press
the
ENT
key.
If you want to return to the Factory Mode initial screen, press
the
ESC
key.
Pressing the
ESC
key again allows you to return to the
maintenance mode screen.
ENT ESC
Into each parameter screen
3. FACTORY MODE