FujiFilm X-T3, Owner'S Manual

Page: 57 / 324

37
2
F
irst St
eps
Inserting Memory Cards
Removing Memory Cards
Before removing memory cards, turn the camera off and open the memory
card slot cover.
Press and release the card to eject it part way (to
prevent the card falling from the slot, press the
center of the card and release it slowly, without
removing your fi nger from the card). The card
can then be removed by hand.
Using Two Cards
The camera can be used with two cards, one in each of its two
slots. At default settings, photos are saved to the card in the sec-
ond slot only when the card in the fi rst slot is full. This can be
changed using
D
SAVE DATA SET-UP > CARD SLOT SETTING
(STILL IMAGE) .
Option Option Description Description Display Display
SEQUENTIAL
(default)
The card in the second slot is used only when the card in
the fi rst slot is full. If the second slot is selected for
D SAVE
DATA SET-UP > SELECT SLOT( x SEQUENTIAL) , re-
cording will start on the card in the second slot and switch
to the fi rst slot when the card in the second slot is full.
BACKUP Each picture is recorded twice, once to each card.
RAW / JPEG
As for SEQUENTIAL , except that the RAW copy of pictures
taken with FINE+RAW or RAW selected for
H
IMAGE QUALITY SETTING > IMAGE QUALITY will
be saved to the card in the fi rst slot and the JPEG copy to
the card in the second slot.
The card used to store movies can be selected using
D
SAVE
DATA SET-UP > SELECT SLOT(
F
SEQUENTIAL) .