FujiFilm X-Pro3, Owner'S Manual

Page: 238 / 344

218
T
he S
etup M
enus
8
AF-ON
If AF-ON is selected, you can press the control instead of keeping
the shutter button pressed halfway.
MODELING FLASH
If MODELING FLASH is selected when a compatible shoe-mount-
ed fl ash unit is attached, you can press the control to test-fi re the
fl ash and check for shadows and the like (modeling fl ash).
TTL-LOCK
If TTL-LOCK is selected, you can press the control to lock fl ash
output according to the option selected for F FLASH SETTING >
TTL-LOCK MODE ( P 150).
n
FACE SELECT
o
n
FACE SELECT
o
can be enabled or
disabled by pressing the button to which
n
FACE SELECT
o
is assigned.
FACE SELECT ON
Enabling n FACE SELECT o allows the focus stick (focus lever)
to be used to select the face that will be used for focus. To switch
from face-detection to manual focus-area selection (
P 72),
press the center of the focus stick (focus lever). Press again to
re-enable face detection.