FujiFilm VisualSonics Vevo MD User Manual Download Page 78

Page: 78 / 463

DICOM

Using data in the Digital Imaging and Communications in Medicine (DICOM)
standard, the ultrasound system can do the following:

Transfer patient exam data to an archiver, see

"Archiving"

on page 95

Import patient data from a worklist, see

"Patient"

on page 165

Export exam data in PACS format to a USB storage device

DICOM is a licensed feature. The system conforms to the DICOM standard as
specified in the

Vevo MD DICOM Conformance Statement

, contact FUJIFILM

SonoSite for a copy of this statement.

The

Vevo MD DICOM Conformance Statement

provides information about the

purpose, characteristics, configuration, and specifications of the network connections
supported by the system.

The system connects over a local area network (LAN) to the following:

Picture Archive and Communication Systems (PACS) archivers

Worklist servers

Modality Performed Procedure Step (MPPS) servers

Storage commitment servers

The system can transfer to one or more devices and connect to different networks—
depending on how you configure it.

System settings

Summary of Contents for VisualSonics Vevo MD
















































































































































































































































































































































































































































































Search results

Summary of Contents for VisualSonics Vevo MD

Reviews:

Related manuals for VisualSonics Vevo MD

Brands by name

Popular brands

FujiFilm VisualSonics Vevo MD, User Manual

Search results

Summary of Contents for VisualSonics Vevo MD

Reviews:

Related manuals for VisualSonics Vevo MD

Brands by name

Popular brands