FujiFilm VisualSonics Vevo MD User Manual Download Page 157

Page: 157 / 463

Important:

When user login is off, only an administrator has access to the user

management panel in system settings; a password must be provided to proceed.

To create a new user account

Only a user with administrative privileges can add a new user to the system.

Open the

User Management

page from the system settings.

Tap

Add User

Tap the

Name

field and enter the user name.

(Optional) Check the

Administrator

check box to add administrative privileges to

this account.

Enter and confirm the password for the user. This can be changed by the user or an

administrative user. See

"To change a user account's password"

on page 161.

Tap

Done

to create the user account. You are then directed to the user list page.

To delete a user account

Only a user with administrative privileges can delete a user account from the system.

Open the

User Management

page from the system settings.

Managing user accounts

157

Summary of Contents for VisualSonics Vevo MD
















































































































































































































































































































































































































































































Search results

Summary of Contents for VisualSonics Vevo MD

Reviews:

Related manuals for VisualSonics Vevo MD

Brands by name

Popular brands

FujiFilm VisualSonics Vevo MD, User Manual

Search results

Summary of Contents for VisualSonics Vevo MD

Reviews:

Related manuals for VisualSonics Vevo MD

Brands by name

Popular brands