38
4. SETUP AND MAINTENANCE
4
3. Click the [Next] button.
4. Click the [Close] button.
• Operation returns to the menu screen.
4.5.7 NC100AY Monitor Frame Ratio Setup
(0425)
The image frame size displayed after pre-scanning can be set up
in this menu.
[Selection]
[Setup and Maintenance]
→
[04 Carrier Adjustment/
Maintenance]
→
[0425 NC100AY Monitor Frame Ratio Setup]
[Procedure]
Set up the monitor frame ratio for each mask.
1. Select the carrier ID to be set up.
2. Change the monitor frame ratio.
NOTE: Set the monitor frame ratio to 95% normally.
If more than 95% is set up, the film mask frame may
be displayed on the monitor screen. Make sure the
mask frame is not displayed in the printing frame
after setting up.
3. Click the [Storage] button.
4. Click the [OK] button.
• The changed data is saved.
5. Click the [Close] button.
• Operation returns to the menu screen.
Printing Frame
Monitor Positive
Image Frame
4.5.7
SP3000_instruct_E.book 38 ページ ２００７年１２月１１日 火曜日 午後１時６分
