FujiFilm SONOSITE X-PORTE, User Manual

Page: 43 / 366

Setting up the system 3-7
Cardiac calculations settings
To specify cardiac measurement names
1 On the Calculations settings page, tap Cardiac .
2 Under TDI Walls , select a name for each wall.
3 Tap Done .
Obstetrics calculations settings
To specify gestational age and growth analysis
1 On the Calculations settings page, tap OB .
2 Select the desired authors (or select None ) in the measurement lists under Gestational Age and Growth
Analysis .
3 Selecting a gestational age author places the associated measurement in the calculations list.
4 To reset the authors for the Gestational Age and Growth Analysis measurement lists to the factory
default, tap Reset .
Creating custom obstetrics measurements and tables
You can create up to five custom measurements that appear in the obstetrics calculations lists, in the list of
custom measurements in Calculations settings, and in the obstetric report.
You can create custom measurements on the system or in the SonoSite X-Porte OB Custom Table Editor, a
Microsoft Excel file available at
www.sonosite.com. You can associate table data with a custom
measurement only if you create the measurement in the OB Custom Table Editor.
Export custom measurements and tables created on the OB Custom Table Editor to a USB memory stick and
then import custom measurements and tables onto your system.
WARNINGS

When you import custom obstetric tables and measurements, the system
replaces existing tables with tables from the OB Custom Table Editor.

When you create, remove, or import a custom obstetric measurement, the
system clears all saved measurements and calculations for the current patient.

Prior to use, verify that custom table data entries are correct. The system does
not confirm the accuracy of the custom table data entered by the user.