FujiFilm SONOSITE X-PORTE, User Manual

Page: 269 / 366

Acoustic output 10-7
Output display
The system meets the AIUM (American Institute of Ultrasound in Medicine) output display standard for MI
and TI (see
“Related guidance documents” on page 10-9). The following table indicates for each
transducer and operating mode when either the TI or MI is greater than or equal to a value of 1.0, thus
requiring display.
Table 11: TI or MI ≥ 1.0
Transducer
Model
Index 2D/ M Mode CPD/Color PW Doppler CW Doppler
C11xp MI No No Yes -
TIC, TIB, or TIS No No Yes -
C35xp MI Yes No Yes -
TIC, TIB, or TIS Yes No Yes -
C60xp MI Yes Yes Yes -
TIC, TIB, or TIS Yes Yes Yes -
D2xp MI - - - No
TIC, TIB, or TIS - - - Yes
HFL38xp MI Yes Yes No -
TIC, TIB, or TIS No No Yes -
HFL50xp MI Yes Yes No -
TIC, TIB, or TIS No No Yes -
HSL25xp MI Yes Yes No -
TIC, TIB, or TIS No No Yes -
Even if MI is less than 1.0, the system provides a continuous real-time display of MI in all imaging modes, in
increments of 0.1.
The system meets the output display standard for TI and provides a continuous real-time display of TI in all imaging
modes, in increments of 0.1.
The TI consists of three user-selectable indices, and only one of these is displayed at any one time. In order to
display TI properly and meet the ALARA principle, the user selects an appropriate TI based on the specific exam
being performed. FUJIFILM SonoSite provides a copy of
AIUM Medical Ultrasound Safety
, which contains
guidance on determining which TI is appropriate (see “Related guidance documents” on page on page 10-9).