FujiFilm SONOSITE X-PORTE, User Manual

Page: 240 / 366

9-6 Safety
Isolating the SonoSite SonoSite X-Porte ultrasound system from power
The SonoSite SonoSite X-Porte ultrasound system does not become completely isolated from power by
pressing the Power button. The only way to completely remove power is to press the Power button,
disconnect the AC input power cord from the stand base, and set all three battery switches to the off
position.
To isolate the system from power
1 Press the Power button.
2 Listen for the audio tone.
3 Disconnect the AC input power cord from the stand base.
4 Depress all three battery switches to the OFF position, indicated by the ·O symbol.
Equipment safety
To protect your ultrasound system, transducer, and accessories, follow these precautions.
Caution Unplugging the AC power cord before you hear the tone may result in loss of
data. If you don’t hear a tone, then your system may be set up to mute all sounds.
To reinstate sounds, see
“Audio settings” on page 3-6.
WARNING When transporting your system, to avoid possible injury from the system tipping,
always collapse the clinical monitor and push forward on the bar on the platform
instead of pushing downward on the bar or pushing the clinical monitor.