manualshive.com logo in svg

FujiFilm SONOSITE X-PORTE, User Manual

Share
Download
FujiFilm SONOSITE X-PORTE User Manual Download Page 221

Cleaning and disinfecting

8-3

Clean and disinfect system and transducer to a high level 

(semi-critical uses)

Use this procedure to clean and high-level disinfect the ultrasound system and transducer 

whenever it

 

has

 

come into contact with blood, broken skin, mucosal membranes, or bodily fluids

.

Follow the manufacturer's instructions when using cleaners and disinfectants. The cleaners and disinfectants 
listed in the procedure are both chemically compatible and have been tested for efficacy with the system 

and transducers. Confirm that the cleaners and disinfectants are appropriate for your facility’s use.

To clean and disinfect the system and transducer 

1 Turn off 

the system by pressing the 

Power button. 

2 Unplug

 the power cord from the outlet.

3 Remove

 the disposable transducer sheath, if applicable.

WARNINGS

To avoid electrical shock, before cleaning, turn off the system and disconnect it 
from the power supply.

Wear the appropriate personal protective equipment (PPE) recommended by 
the chemical manufacturer, such as eyewear and gloves.

Cautions

Do not skip any steps or abbreviate the cleaning and disinfecting process in any 
way.

Do not spray cleaners or disinfectants directly on the system surfaces or on 
system and transducer connectors. Doing  so may cause solution to leak into the 
system, damaging it and voiding the warranty.

Do not attempt to disinfect a transducer or transducer cable using a method or 
chemical that is not included here. This can damage the transducer and void the 
warranty. 

Use only FUJIFILM SonoSite recommended cleaners and disinfectants. Using a 
non- recommended disinfecting solution or incorrect solution strength can 
damage  the System and transducer and void the warranty. Follow the 
disinfectant manufacturer’s recommendations for solutions strengths. 

Notes

You must clean and disinfect both the ultrasound system and the transducer 
after each use, but only the transducer can be disinfected to a high level. 

To clean the TEExp transducer, refer to the 

TEExp Transducer User Guide.

Option A

Summary of Contents for SONOSITE X-PORTE















































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands