manualshive.com logo in svg

FujiFilm SONOSITE X-PORTE, User Manual

Share
Download
FujiFilm SONOSITE X-PORTE User Manual Download Page 212

7-2

Troubleshooting and maintenance

Printing does not work.

 If you are printing to a DICOM printer, check with your system administrator to 

make sure that DICOM settings are accurate and that your system is connected to the network.

If you are printing to a local printer, do any of the following:

Check the printer connections. The system will automatically detect the printer.

Ensure that the local printer is turned on and set up properly. See the printer manufacturer’s 
instructions, if necessary.

Only saved images and video clips and the current patient’s worksheets can be printed. 

DVR does not record.

 Make sure that the USB memory stick has enough available space. 

System does not recognize the transducer.

 Disconnect and reconnect the transducer.

Maintenance icon (

) appears on screen.

 Restart the system. If the issue recurs, system 

maintenance may be required. Note the number that appears in parentheses on the C: line and contact 
FUJIFILM SonoSite or your FUJIFILM SonoSite representative.

System prompts you to ensure the USB device is valid.

 Use the USB memory stick included with the 

system.

Make sure that the USB memory stick is not software-encrypted and is not defective.

System prompts you to ensure the USB device contains valid data. 

Make sure that the data are 

present on the USB memory stick.

Re-export the original data onto the USB memory stick. Contact your system administrator.

USB device does not appear in the list. 

Check that the USB device has been properly inserted into an 

available USB slot. Use the USB memory stick that came with the system.

System displays the alert “…internal storage device is full.”

 Free internal storage space by ending 

the current exam, archiving or exporting patient exams, and then deleting them from the system.

Cannot access Patient Form. Cannot access Patient List.

 Ensure that you are logged in as a user, not 

as a guest.

System does not export or transfer video clips (DICOM). 

In the 

Archiver

 settings of DICOM Config, 

make sure that 

Exclude Video Clips

 is not checked.

Software licensing

FUJIFILM SonoSite software is controlled by a license key. After you install new software, the system 
prompts you for a license key. You must obtain one key for each system and transducer package that uses 
the software.

Note

If you are using the AC printer, the system must be connected to AC mains. 

Summary of Contents for SONOSITE X-PORTE















































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands