Measurements and calculations
5-1
CHAPTER 5
Measurements and calculations
This section provides information about measurements, calculations, worksheets, and
reports.
Measuring
X-Porte offers several types of measurements.
You can perform independent measurements, or you can perform a measurement and
then assign it to a calculation (see
“Assigning measurements to calculations”
page 5-8). If you want to save a measurement, you must assign it to a calculation (which
saves results to the patient report), or you can save the image with the calipers displayed.
If you prefer to start within a calculation, see
Calipers
You perform most measurements by using calipers that you drag into position. The active
caliper has a round highlighted handle .
To activate calipers
Tap the caliper.
To switch between calipers
Do any of the following:
Tap either caliper.
Tap the switch icon
beneath the measurement result on the left side of the
touch panel.
Tap the caliper under
Measure
.
Summary of Contents for SONOSITE X-PORTE
