Optional Units
30
Curl Correction
The curl correction button is used to correct paper curl caused by heat and/or pressure.
The curl correction button can be operated regardless of the machine state when the machine is
ON.
Note
• This curl correction function can be used during printing. Fine correction according to the paper properties can
be made from control panel.
• Since staples are likely to be affected by curl, make sure to perform curl correction by checking the curl direc-
tion of output paper.
• When correction is performed while the machine is in operation, it is applied to the paper output immediately
after the button is pressed.
1.
Check the curl direction of paper.
2.
Confirm that the curl correction indicator is lit, and
then press the button.
Note
• When paper is fed in the [AUTO] mode, the indicator showing the
present direction and intensity of curl correction turns on only for
a brief moment. When manually applying the curl correction,
make adjustments while using this indicator lighting as a guide.
• After applying the curl correction by upward curl correction but-
ton or downward curl correction button, when feeding thick pa-
per, embossed paper, or OHP film, the [AUTO] is entered auto-
matically, and the curl correction is applied using standard
correction value.
You can also change to a setting that the mode does not change
to [AUTO] mode even when using these paper types. For details,
contact your local representative.
Upward curl
correction button
Downward curl
correction button
<AUTO> button
