FujiFilm PXG4, Operation Manuals

Page: 61 / 158

– 60 –
6
Chapter
Guaranteed Soak ,
Guaranteed Soak Lower Limit ,
Guaranteed Soak Upper Limit
This function guarantees soak time. Soak time only
counts down when SV is in the proper temperature range.
In the diagram below, the total of the shaded regions
counts towards soak time. When this total matches the
specified soak time, the cycle proceeds to the next step.
The following settings are available.
•
Guaranty soak : Yes/No
•
Guaranty soak upper limit : 0% to 50% FS
•
Guaranty soak lower limit : 0% to 50% FS
Setting Guaranty Soak
The following steps explain how to set guaranty soak by using
guaranty soak = "Yes" and a range of 5°C between the upper
and lower limits as an example.
1
Press and hold the key to display the setup
mode channel menu ("
ooo oPPPPEEEE CCCChhhh 1111
"), then use the
keys to display PrG ("
PPP
PrrrrGGGG CCCChhhh 4444
").
Refer to
See p. 56 in this chapter for information on how to display
the operation menu.
2
Press and hold the key, the use the
keys to display GSok ("
GGG GSSSSooookkkk
").
Select an activation pattern.
3
Press the key, then use the keys to
select "on" when the bottom part of the display
begins to blink.
Guaranty soak is set.
PV
t
set value
T1 T2 T3
soak time = T1+T2+T3
SV
guaranty soak band
upper limit
guaranty soak band
lower limit
4
Press the key to confirm the setting.
5
Use the keys to display GS-L ("
GGG
GSSSS----LLLL
").
Set the guaranty soak lower limit.
6
Press the key, then use the keys to
set 5.0 when the bottom part of the display begins
to blink.
The guaranty soak lower limit is set to 5.0°C.
7
Repeat steps 5 and 6 to set the guaranty soak
upper limit GS-H ("
GGG
GSSSS----HHHH
").
8
Press the key to return to the operation mode
PV/SV display.