FujiFilm PXG4, Operation Manuals

Page: 57 / 158

– 56 –
6
Chapter
Ramp/Soak Activation Pattern
The 16-step ramp/soak patterns are divided into seven
types, any one of which can be used.
• Range 0: Steps 1 to 4
1: Steps 5 to 8
2: Steps 1 to 8
3: Steps 9 to 12
4: Steps 13 to 16
5: Steps 9 to 16
6: Steps 1 to 16
Setting the Ramp/Soak Activation Pattern
The following steps explain how to set the ramp/soak activation
pattern by using steps 1-4 as an example.
SV-1
SV-2
SV-3
SV-5
SV-7
SV-8
time
step1 to 4 : pattern 0
SV-9
SV-10
SV-11
SV-6
step5 to 8 : pattern1
step9 to 12 : pattern 3
step13 to 16 : pattern 4
step1 to 8 : pattern 2 step9 to 12 : pattern 5
step1 to 8 : pattern 6
SV
SV-4
SV-16
SV-15
SV-14
SV-13
SV-12
step1
step2
step3
step4
step5 step6
step7
step8 step9 step10
step11
step12
step13
step14
step15
step16
Caution
Do not change this parameter during ramp/soak
operations. Make sure that
"
PrG
"
=
"
oFF
"
before making
changes.
1
Press and hold the key to display Mv1
("
MMM Mvvvv1111
").
The MV1 output of the monitoring mode is displayed.
Operation mode
2
Press and hold the key to display the setup
mode channel menu ("
ooo
oPPPPEEEE CCCChhhh 1111
"), then use the
keys to display PrG ("
PPP PLLLLTTTT CCCChhhh 4444
").
Set the ramp/soak menu.
3
Press and hold the key, the use the
keys to display PTn ("
PPP
PTTTTnnnn
").
Select an activation pattern.
4
Press the key, then use the keys to
select 0 when the bottom part of the display
begins to blink.
Pattern 0 is selected.
5
Press the key to confirm the setting.
6
Press the key to return to the operation mode
PV/SV display.