FujiFilm PXG4, Operation Manuals

Page: 47 / 158

– 46 –
5
Chapter
SV Set Value
to
Up to seven types of SV (SV1-SV7) can be recorded.
Recorded SVs can be recalled from SV selection ("
SSS Svvvvnnnn
")
in the operation menu.
• Range: SV lower limit (SVL) to SV upper limit (SVH)%FS
Setting SV
The following steps will explain how to set SV1 to 300°C as
an example.
Point
Use the ramp SV function of the system menu ("
SYS Ch 7
")
to prevent loss of control when switching SV numbers.
Refer to
See "SV No. Switch" (p. 26) for more information about selecting
SV, local SV and changing SV with DI.
1
Press and hold the key to display "
mmm
mvvvv1111
".
The MV output of the monitoring mode is displayed.
2
Press and hold the key to display the setup mode
channel menu ("
ooo oPPPPEEEE CCCChhhh 1111
") then use the
keys to display PLT ("
PPP PLLLLTTTT CCCChhhh 3333
").
Specify the palette menu.
3
Press and hold the key, then use the
keys to display Sv1 ("
SSS
Svvvv1111
").
Set SV No. 1.
4
Press the key, then use the keys to
set SV to 300.0 when the bottom part of the
display begins to blink.
SV1 is set to 300.0°C.
5
Press the key to confirm the setting.
Operation mode
6
Repeat steps 3 to 5 (excluding pressing and
holding the key) to set SV2 to SV7.
7
Press the key to return to the operation mode
PV/SV display.