FujiFilm PXG4, Operation Manuals

Page: 36 / 158

– 35 –
4
Chapter
Output Convergence Value
Output convergence value is a function that adds MV
value offset.
• Range bAL : -100% to 100%
●
The output convergence value function ("
bbb bAAAALLLL
") outputs to
PV and SV a calculated result of the PID computed MV
plus the bAL offset.
(The factory setting of bAL is 0% for single output, 50% for
dual output.)
Setting the Output Convergence Value
proportional
band
MV
bAL=40%
50%
PV
SV
40%
bAL=0%
100%
1
Press and hold the key to display the setup
mode channel menu ("
ooo oPPPPEEEE CCCChhhh 1111
"), then use the
keys to display Pid ("
PPP
Piiiidddd CCCChhhh 2222
").
Refer to
See p. 31 in this chapter for information on how to display
the channel menu.
2
Press and hold the key to display P ("
PPP P
") then
use the keys to display bAL ("
bbb bAAAALLLL
").
Set the output convergence value.
3
Press the key, then use the keys to set
the output convergence value to "3.0".
The output convergence value is set to 3.0.
4
Press the key to confirm the setting.
5
Press the key to return to the operation mode
PV/SV display.