FujiFilm PXG4, Operation Manuals

Page: 11 / 158

– 10 –
1
Chapter
Part Names and Functions
This section details the name and function of each part of the face panel.
D01 Lamp
D02 Lamp
D03 Lamp
PV Display
SV Display
▼
Key
▲
Key
C2 Lamp
C1 Lamp
SV Lamp
USER Key
SEL Key
MAN/AT/SELF Lamp
Keypad
USER Key
Pressing this key in monitor mode display or setup mode
display returns you to the PV/SV display.
Pressing this key on the PV/SV display allows you to set the
function for "
UUU
UkkkkEEEEYYYY
" under the system menu ("
SSS
SYYYYSSSS CCCChhhh 7777
").
(Auto/Manual switching is set to this key by factory default.)
SEL Key
Pressing this key switches you to monitor mode display or
setup mode display from PV/SV display.
After switching to parameter mode, this key functions as the
select key when changing parameters.
Holding this key down in channel display or parameter display
returns you to the PV/SV display.
Pressing this key in PV/SV display shows the manual output
value at the bottom of the screen.
▲
Key
Pressing once will increase the setting value by one. Holding
down the button will continue to increase the value.
It changes SV on the PV/SV display.
It is also used to move between items in channel screen
display and parameter screen display.
▼
Key
Pressing once will decrease the setting value by one. Holding
down the button will continue to decrease the value.
It changes SV on the PV/SV display.
It is also used to move between items in channel screen
display and parameter screen display.
Display
C1/C2 Lamp
Displays the condition of the control output. Lights on at
100% output and goes off at 0% output. For values between
0% and 100%, the output is indicated by the length of time
the lamp flickers. When acting as a valve control, the C1 lamp
will flicker with OPEN output, and the C2 lamp will flicker with
CLOSE output.
DO1/2/3 Lamp
Lights on when there is digital output (Do) from Do 1, Do 2, or
Do 3. The lamp blinks when delay action is on.
PV Display
Displays setting values (PV). Displays the name of the
parameter when setting parameters.
SV Display
Displays set values (SV). Also can display the output value
during manual mode. Displays current value when changing
parameter settings. Displays "
rrr rEEEEMMMM
" during remote mode, and
"
SSS
SooooFFFFTTTT
" during soft start.
SV Lamp
Illuminates when displaying the SV value. Does not illuminate
in manual mode.
The lamp blinks while performing ramp/soak or lamp SV
operations.
MAN/AT/SELF Lamp
The lamp stays lit during manual mode. The lamp blinks
during auto-tuning and self-tuning.