background image

9

NA_EN

How to Check the Battery Level

Press   (Back) on the shooting or playback screen to display the 
remaining battery charge on the LCD Screen.

Display

Remaining battery charge

Sufficient battery charge remaining.

Less than half of battery charge remaining. 
Recharging the battery is recommended.

Low battery charge. Recharge the battery as 
soon as possible.

• 

When the battery charge is low, an icon (

) will also appear in 

the lower right corner of the LCD Screen.

• 

When the battery is completely depleted, an icon (

) will 

appear in the middle of the LCD Screen and the power will turn 
off.

To return to the shooting screen or playback screen, press 
(Back) again.

Configure the Initial Settings

When you turn on the camera for the first time after purchase, you 
will be automatically prompted to set the language, the date and 
time, and to pair your Smartphone.

Before pairing registration, install the INSTAX MINI EVO App on 
your Smartphone.

• 

If you are using an Android OS Smartphone, search for INSTAX 
MINI EVO on Google Play and install it.
*Requirements for Android OS Smartphones: Android version 

7 or later and have Google Play installed.

• 

If you are using an iOS Smartphone, search for INSTAX MINI 
EVO in the App Store and install it.
*Requirements for iOS Smartphones: iOS version 12 or later

Depending on your Smartphone model, you may not be able to 
use the Smartphone App even if you have installed it and meet 
the above operation requirements.

This setting can be set at a later time� If you want to set or re-set 
it later, set it from [

言語

/LANG�], [DATE/TIME], and [BLUETOOTH 

SETTINGS] in the setup menu�

Turning on the power�

• 

When you turn on the camera for the first time after 
purchase, the language setting screen will appear.

Select the language you want to use, and then press 
[MENU/OK]�

言語

/LANG.

日本語

ENGLISH

FRANCAIS

DEUTSCH

ESPAÑOL

NO

Summary of Contents for inxtax mini Evo FI019






























Reviews: