FujiFilm GFX 50R, Owner'S Manual

Page: 266 / 288

246
T
echnical Not
es
12
Cleaning the Image Sensor
Dust that cannot be removed using
D
USER SETTING >
SENSOR CLEANING can be removed manually as de-
scribed below.
O
Note that there will be a charge to repair or replace the image sensor
if it is damaged during cleaning.
1
Use a blower (not a brush) to remove
dust from the sensor.
O
Do not use a brush or blower brush.
Failure to observe this precaution
could damage the sensor.
2 Check whether the dust has been successfully removed. Re-
peat Steps 1 and 2 as necessary.
3 Replace the body cap or lens.