FujiFilm GFX 100S, Owner'S Manual

Page: 273 / 368

249
T
he S
etup M
enus
8
CONNECTION SETTING
CONNECTION MODE
Adjust settings for connection to external devices.
Option Option Description Description
USB CARD READER
Connecting the camera to a computer via USB automatically
enables data transfer mode, allowing data to be copied to
the computer. The camera functions normally when not con-
nected.
USB TETHER
SHOOTING AUTO
The camera can be controlled from computers, gimbals,
drones, or other devices connected via USB. The camera au-
tomatically enters “tethered shooting” (i.e., remote-control)
mode when the external device is turned on and returns to
normal operation when the external device turned off or dis-
connected.
•
Photographs can be taken remotely and automatically
downloaded to computers running Capture One, Ado-
be® Photoshop® Lightroom® + Tether Plugin, FUJIFILM X
Acquire, or FUJIFILM Pixel Shift Combiner. FUJIFILM X Ac-
quire can also be used to save and load camera settings.
•
The camera can be used as a webcam when connected to
a computer running FUJIFILM X Webcam.
•
Remote photography and movie recording are available
when the camera is connected to a compatible device
such as a gimbal or drone. Use camera controls to switch
between still photography and movie recording. The fea-
tures available vary with the device connected.
USB TETHER
SHOOTING FIXED
As for USB TETHER SHOOTING AUTO , except that the
camera remains in “tethered shooting” (remote-control)
mode when the external device is off or not connected, al-
lowing the device to resume control when the connection
is re-established after an accidental disconnection or other
disruption. At default settings, pictures are not recorded to
the memory card.
WIRELESS TETHER
SHOOTING FIXED
Choose this option for wireless remote photography. Select a
network using
D CONNECTION SETTING > NETWORK
SETTING .