3-33
897N203029A FDC NX600 Instruction Manual 2022.01
3 Measurement
3.9.3 Assembling the Sample Rack
Assemble the sample rack according to the type of blood collection tube and tube to be used.
IMPORTANT:
Incorrect assembly may cause bad suction, which may adversely affect the test results or cause a
failure.
<Assembly preparation>
The following parts are included in the bundled items.
NOTE
The number in parentheses is the number of parts included in the bundled items.
NOTE
The spacer (
9
) is are not used for the FDC NX600i.
Note: There are upper- and lower-sides of spacers. Do not turn them upside down.
3
Tube holder (1)
for φ 13mm tube
2
Tube holder (1)
for φ 16mm tube
5
Tube holder (1)
for FUJI tube 0.5mL
6
Calibrator CP
holder (1)
4
Tube holder (1)
for FUJI tube 1.5mL
8
Spacer (1)
for 100mm tube
H = 32mm (medium)
9
Spacer (1)
for PF 75mm tube
H = 25mm (short)
7
Spacer (1)
for 75mm tube
H = 54.5mm (long)
1
Sample rack body (4)
0
Pin (9)
a
Label (1)
Ｈ
Ｈ
Ｈ
3
