5-2
897N203029A FDC NX600 Instruction Manual 2022.01
5 Loading Consumables
5.2 Setting Tips
Tips are required for all measurements. Check the number of remaining tips on the LCD before per-
forming measurements. If necessary, add new tips.
WARNING:
During sample application, tap the [STOP] button to stop application, and then load the tips. Load-
ing is unsafe during sample application because the sampler and the consumable disk are mov-
ing.
Consumable display
1. With [Warming up], [Lamp warming up]
or [Ready to test] displayed on the LCD,
make sure that the analyzer is not apply-
ing samples.
2. Tap the consumables display on the
LCD.
3. The Consumables loading screen is dis-
played.
5
