FujiFilm Frontier-S DX100, Service Manual

Page: 226 / 303

226
5.3Board Related Adjustments
DX100 Service Manual
5.3 Board Related Adjustments
5.3.1 NVRAM Data Backup / Restore
Parameters stored in the NVRAM on the Main Board are read/stored and written onto the other
NVRAM on the Main Board using this menu.
Also, the exported parameter information is displayed on the computer screen.

NVRAM Read Procedure
1. Select 1. Adjust / Maintenance

Main board Exchange

NVRAM Data
Backup / Restore .
2. Click [Get Information]
on “NVRAM Read” to start reading the
parameters.
3. Check the NVRAM information on site:
Click
[Disp Hist .Info] to display another screen of the NVRAM Viewer.
Store the NVRAM information:
Click
[Save] . The file is named as “serial acquisition date”
automatically.

NVRAM Write Procedure
1. Select 1. Adjust / Maintenance

Main board Exchange

NVRAM Data
Backup / Restore .
2. Click [Open] on [NVRAM Write].
3. Select the NVRAM file to write on the printer.
4. Click [Write]
to start writing the parameters.
5.
When the writing is completed, exit out of the
Service Program.
6. Turn the printer OFF.
x
Figure 5-16. NV-RAM BACKUP UTILITY Screen
C H E C K
P O I N T
The backed up data is saved in the following location.
=> \\Service Program holder \ ServiceBackup